 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com Ordering number : ENN7718 VEC2305 VEC2305 Features * * * P-Channel Silicon MOSFET General-Purpose Switching Device Applications For load switches, DC / DC converters. 1.8V drive. Composite type with 2 P-Channel MOSFETs (MCH3319) contained in a singlepackage, facilitaing high-density mounting. Specifications Absolute Maximum Ratings at Ta=25C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Total Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD PT Tch Tstg PW10s, duty cycle1% Mounted on a ceramic board (900mm2!0.8mm)1unit Mounted on a ceramic board (900mm2!0.8mm) Conditions Ratings --12 8 --2.5 --10 0.9 1.0 150 --55 to +150 Unit V V A A W W C C Electrical Characteristics at Ta=25C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Symbol V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 RDS(on)3 Ciss Coss Crss Conditions ID=--1mA, VGS=0 VDS=-12V, VGS=0 VGS=6.4V, VDS=0 VDS=-6V, ID=--1mA VDS=-6V, ID=--1.5A ID=--1.5A, VGS=-4.5V ID=--0.8A, VGS=-2.5V ID=--0.4A, VGS=-1.8V VDS=-6V, f=1MHz VDS=-6V, f=1MHz VDS=-6V, f=1MHz Ratings min --12 --10 10 --0.3 2.7 4.5 87 122 162 450 100 85 115 172 275 --1.0 typ max Unit V A A V S m m m pF pF pF Marking : BW Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 71504 TS IM TA-101071 No.7718-1/4 www..com VEC2305 Continued from preceding page. Parameter Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage Symbol td(on) tr td(off) tf Qg Qgs Qgd VSD Conditions See specified Test Circuit See specified Test Circuit See specified Test Circuit See specified Test Circuit VDS=--6V, VGS=--4.5V, ID=-2.5A VDS=--6V, VGS=--4.5V, ID=-2.5A VDS=--6V, VGS=--4.5V, ID=-2.5A IS=--2.5A, VGS=0 Ratings min typ 15 75 64 50 6.5 0.8 2.0 --0.85 --1.5 max Unit ns ns ns ns nC nC nC V Package Dimensions unit : mm 2227A 0.25 0.3 8 7 65 0.15 Electrical Connection 8 7 6 5 0.25 1 2 2.9 3 0.65 4 1 : Source1 2 : Gate1 3 : Source2 4 : Gate2 5 : Drain2 6 : Drain2 7 : Drain1 8 : Drain1 1 2 3 4 2.8 2.3 Top view 0.75 1 : Source1 2 : Gate1 3 : Source2 4 : Gate2 5 : Drain2 6 : Drain2 7 : Drain1 8 : Drain1 SANYO : VEC8 Switching Time Test Circuit VIN 0V --4.5V VIN ID= --1.5A RL=4 VDD= --6V 0.07 D PW=10s D.C.1% VOUT G VEC2305 P.G 50 S No.7718-2/4 www..com VEC2305 --3.0 ID -- VDS --3 .0V --3.0 ID -- VGS VDS= --6V Drain Current, ID -- A --3 . 5V --2.5 --2 .5 V --2.5 --2.0 Drain Current, ID -- A --2.0 --1.5 --4 .5 8 --1. V V --1.5 --1.5V --1.0 Ta = --0.5 0 --0.2 --0.4 --0.6 --0.8 --1.0 --0.5 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 IT06894 --1.2 25 --1.4 C VGS= --1.0V --25 C --1.0 75 C --1.6 --1.8 Drain-to-Source Voltage, VDS -- V 250 RDS(on) -- VGS Gate-to-Source Voltage, VGS -- V 300 IT06895 RDS(on) -- Ta Ta=25C Static Drain-to-Source On-State Resistance, RDS(on) -- m Static Drain-to-Source On-State Resistance, RDS(on) -- m 200 250 ID= --1.5A 150 200 --0.8A --0.4A 100 I D= 150 100 V = --2.5 , V GS --0.8A I D= = --4.5V A, V GS I D= --1.5 = --1. , VGS --0.4A 8V 50 50 0 0 --1 --2 --3 --4 --5 --6 --7 --8 0 --60 --40 --20 0 20 40 60 80 100 120 140 160 Gate-to-Source Voltage, VGS -- V 3 yfs -- ID IT06896 --10 7 5 Ambient Temperature, Ta -- C IT06897 IF -- VSD VGS=0 Forward Transfer Admittance, yfs -- S VDS= --6V 2 Forward Current, IF -- A Ta= 7 5 Ta= 3 2 --25 C C 75 --1.0 7 5 3 2 C 25 1.0 7 --0.1 2 3 5 7 --1.0 2 3 5 --10 IT06898 7 --0.1 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 --1.1 --1.2 Drain Current, ID -- A 5 3 SW Time -- ID 1000 Ciss, Coss, Crss -- VDS f=1MHz Diode Forward Voltage, VSD -- V --25 25 7 C C 2 5C 10 3 IT06899 VDD= --6V VGS= --4.5V Ciss, Coss, Crss -- pF 7 5 Switching Time, SW Time -- ns Ciss 2 3 2 100 7 5 3 2 td(off) tf Coss 100 7 tr Crss td(on) 2 3 5 7 2 3 5 7 5 3 --1.0 0 --2 --4 --6 --8 --10 --12 IT06900 10 --0.1 Drain Current, ID -- A IT06902 Drain-to-Source Voltage, VDS -- V No.7718-3/4 www..com VEC2305 --4.5 --4.0 --3.5 VGS -- Qg VDS= --6V ID= --2.5A Drain Current, ID -- A 3 2 --10 7 5 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 ASO IDP= --10A ID= --2.5A 10s 1m s 10 m s 10 0m s Gate-to-Source Voltage, VGS -- V --3.0 --2.5 --2.0 --1.5 --1.0 --0.5 0 0 1 2 3 4 5 6 7 IT06901 DC op era tio n Operation in this area is limited by RDS(on). Ta=25C Single pulse Mounted on a ceramic board (900mm2!0.8mm) 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 --0.01 --0.01 Total Gate Charge, Qg -- nC 1.2 Drain-to-Source Voltage, VDS -- V 5 7 --10 2 3 IT06903 PD -- Ta Mounted on a ceramic board (900mm2!0.8mm) Allowable Power Dissipation, PD -- W 1.0 0.9 0.8 To t al Di 0.6 ss 1u ip ni ati t on 0.4 0.2 0 0 20 40 60 80 100 120 140 160 Ambient Temperature, Ta -- C IT06904 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2004. Specifications and information herein are subject to change without notice. PS No.7718-4/4 |
Price & Availability of VEC2305
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |